Need help?Do you have a question about the Gonow OMT-M3 and is the answer not in the manual?
General| Brand | Gonow |
|---|---|
| Model | OMT-M3 |
| Category | Bicycle Accessories |
| Language | English |
Detailed steps for powering the display and controller on and off using the power button.
How to switch between Real time speed, Max speed, and Average speed displays.
Procedure to cycle through ODO, TRIP, Driving Time, and Error Code displays.
Sets backlight brightness level from 1 (lightest) to 3, with level 2 as default.
Sets the wheel size in inches with a step of 0.1 inch.
Sets the speed limit from 0 to 100 Km/h; 100 means no limit.
Selects driving mode: Assist (0), Electrical (1), or Both (2).
Adjusts assist sensitivity from 1 to 24.
Sets the current limit for the controller from 1 to 20A.
Configures low voltage protection for the controller, showing protected voltage (e.g., 29V).
Resets all parameters to default values (except ODO distance) by displaying 'SSSS'.
Lists error codes (Decimal), their significations, and suggested handling methods.
To Next Page