8
Manual
Content: Page:
1 Description and Function 8
2 Intended Use 8
3 Notes on Safety 8
4 Parts Package 9
5 Construction 9
6 Preparing 10
7 Capacity measurement 10
8 Fuse Check 10
9 Changing the battery and the fuse 10
10 Care, Maintenance, Storage and Transport 10
11 Troubleshooting 11
12 Specications 11
13 Table of measuring value 11
14 Warranty and Liability 12
15 Note on Waste Disposal 12
16 CE Declaration 12
1 Description and Function:
Your digital Capacity Measurement Device is made for measuring the capacity of
capacitors and includes battery control and automatic polarity detection. Negative
polarity is displayed as minus “-“.
2 Intended Use:
Your product is provided for using like described in chapter 1 only. It is not
allowed to use the device in other ways than described in chapter “Description
and Function”. Use this device only in dry interior rooms. The symbol with the
house reminds you of that. If you do not attend to these regulations and notes on safety,
it might causes fatal accidents, injuries and damages to persons and property.
3 Notes on Safety:
ATTENTION! Only skilled electricians may assemble and disassemble the
housing of the product. There is a risk of electric shock and short circuit!
• Your product is not a toy and is not meant for children, because it contains small parts
which can be swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot be
injured, or objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on them
ATTENTION! Please read the user manualcompletely and carefully. It is part of the
product and includes important information for proper installation and use. Keep
this guide to have it available, when there are uncertainties, or the product will be
passed on.
Digital Capacity Measurement Device
MES MULTI DS-568F
To Next Page
Loading...
Need help?
General
