Goobay MW 9168 GS User Manual

13
5 Installing and Operating:
Installing:
1. Check all used products for being compatible to each other.
2. Only charge nickel-metal hydride (NiMH) or nickel-cadmium
rechargeable batteries (NiCd).
3. Place the charger only on horizontal and non-skidding
surfaces.
Operating:
Charge, discharge or refresh rechargeable batteries.
Operating elements:
4 AKKUS
LADEN
REFRESH-
FUNKTION
2 AKKUS
LADEN
ENTLADEN
1
2
3
Battery types: 1 x 9V block, 2-4 x AAA/AA/C/D-
cells (NiCD or NiMH)
Charge 2 AAA/AA/C/D cells: 1. Insert the batteries next to each
other into the 2 left charging slots.
2. Switch the mode switch to
“2 AKKUS LADEN“.
LED 3 shines red. The batteries are charging.
Charge 4 AAA/AA/C/D cells: 1. Insert the batteries to the
charging slots.
2. Switch the mode switch to
“4 AKKUS LADEN“.
Otherwise only the left 2 batteries are charged.
LED 3 shines red. The batteries are charging.
Refresh batteries: 1. Insert 2-4 batteries into the

Goobay MW 9168 GS Specifications

General

Brand	Goobay
Model	MW 9168 GS
Category	Battery Charger
Language	English