GoodHome bamia GHIH80 User Manual

72 pages

Questions and Answers:

E
Elizabeth LeonAug 3, 2025
Why is my GoodHome Ventilation Hood vibrating excessively?
- J
  Jenna KruegerAug 3, 2025
  Excessive vibration in your GoodHome Ventilation Hood can occur if the appliance isn't properly installed on the brackets; in this case, take down the appliance and check it is properly fixed. Vibration may also be caused by a damaged fan blade, in which case you should switch off the appliance and arrange for qualified service personnel to carry out the repair. Another possible cause is that the fan motor is not fixed tightly.
D
Dorothy SaundersAug 19, 2025
What to do if the light is on but the fan does not work on my GoodHome bamia GHIH80?
- A
  Alexander WeaverAug 19, 2025
  If the light is on but the fan isn't working on your GoodHome Ventilation Hood, it could be due to a jammed fan blade or a damaged motor.

GoodHome bamia GHIH80 Specifications

General

Width	80 cm
Number of speeds	3
Lighting	LED
Grease filter type	Aluminum
Number of Motors	1
Material	Stainless steel
Mounting	Wall-mounted

Summary

Preparation

Initial Steps and Preparations

Covers the initial preparation phase before installation begins.

Installation

Installation Type Selection (Ducted/Recirculation)

Choosing between ducted extraction to the outside or recirculation.

Safety Distances and Building Codes

Ensuring compliance with local regulations and safe distances.

Cabinet Mounting and Preparation

Guidance for wall mounting and preparing the cabinet.

Component Identification and Modification

Identifying and modifying cabinet parts for appliance installation.

Cutting and Shaping Procedures

Instructions for cutting and shaping cabinet components using templates.

Use and Operation

Initial Setup and Mode Selection

First-time setup and choosing between ducted or recirculation modes.

Control Panel Overview and Functions

Explanation of the appliance's control panel and its functions.

Appliance Operation Controls

Using fan, light, timer, and on/off controls on the appliance.

Movement Sensor Operation

How to use the movement sensor for appliance control.

Hob Connectivity and Control

Connecting and controlling the hood remotely from the induction hob.

Care and Maintenance

Carbon Filter Replacement

Procedure for replacing the carbon filters every three months.

Aluminium Grease Filter Cleaning

Steps for cleaning the aluminium grease filters monthly.

LED Lamp Replacement

Information regarding the replacement of LED lamps by a technician.

Related product manuals

Preview: GoodHome bamia

Preview: GoodHome GHAG60PLAS

GoodHome GHAG60PLAS