121
EN Care & maintenance FR Entretien et maintenance
PL Czyszczenie i konserwacja RO Îngrijire și întreținere
Damaged power cables should be replaced by a
competent person or qualified electrician.
If the surface of the hob becomes cracked, do
not use, switch off the appliance at the fused
spur and contact customer services.
For domestic use only. Do not place rough or uneven vessels on the
hob, as they could damage the glass surface.
Never place an empty pan on the hob as this
will cause the overheat sensor to switch off the
appliance automatically.
Avoid banging pots and pans down on the
hob. The induction surface is tough but not
unbreakable.
When a cooking zone has been on for a long
time, the surface remains hot and shows "H" in
the display.
Do not put detergents or flammable materials
beneath the hob.
• The appliance should be cleaned after use, allow to cool first!
• The surface of the induction hob should be cleaned as follows:
Type of dirt Cleaning method Cleaning materials
Limescale Apply white vinegar to the surface, then wipe it dry with soft cloth Special induction cleaner
Burnt-on stains Clean with damp cloth and dry it with a soft cloth Special induction cleaner
Light stains Clean with damp cloth and dry it with a soft cloth Cleaning sponge
Melted plastics Use a scraper suitable for induction glass to remove residue Special induction cleaner
CAUTION: Avoid rubbing with any abrasive or with the base of the pans, etc, as this will wear the markings on
the top of the induction hob over time.
• Clean the induction hob on a regular basis to prevent the build up of food residue.
Never use:
• Undiluted washing-up liquid
• Detergent intended for dishwashers
• Scouring agents
• Harsh cleaning agents such as oven spray or stain remover
• Abrasive sponges
• High-pressure cleaners or steam jet cleaners
Customer helpline (toll free):
UK 0800 324 7818 uk@kingfisherservice.com
Eire 1-800 932 230 eire@kingfisherservice.com
To Next Page
Loading...
Need help?
General
