Why is my GoodHome hob fan still running after I turn it off?
A cooling fan is built into your GoodHome induction hob to prevent the electronics from overheating. It's normal for the fan to run even after you turn the hob off, and it requires no action. Do not switch off the power to the induction hob while the fan is running.
What to do if my GoodHome hob cooktop cannot be turned on?
If your GoodHome hob cooktop won't turn on, ensure it's properly connected to the power supply and switched on. Check the household fuse for the appliance and try other electric appliances to see if there is a power cut.
What to do if my pan does not heat up on GoodHome hob?
If your pan isn't heating up on your GoodHome hob and isn't showing on the display, it could be due to a few reasons. First, make sure you're using cookware suitable for induction cooking. Second, center the pan on the cooking zone, ensuring its base matches the zone's size.
Why is my GoodHome induction hob making a humming noise?
The low humming noise from your GoodHome induction hob when used on a high heat setting is caused by the technology of induction cooking. This is normal, and the noise should quieten down or disappear completely when you decrease the heat setting.
What to do if my GoodHome hob displays ER03?
Clean the Control Panel or move the pan.
Why are the touch controls on my GoodHome hob difficult to operate?
If the touch controls on your GoodHome hob are difficult to operate, it might be due to a slight film of water on the controls or using the tip of your finger. Make sure the touch control area is dry and use the ball of your finger when touching the controls.
What to do if my GoodHome hob displays E4?
Ensure the correct power supply is being used.
What to do if my GoodHome hob displays E3?
Ensure the correct power supply is being used.
What to do if my GoodHome hob displays E2?
Allow to cool and restart after 30 minutes.
What to do if my GoodHome hob displays E1?
Allow to cool and restart after 30 minutes.
To Next Page
General