Goodwe Wi-Fi/LAN Kit - Page 6

5
Quick Installation Guide V1.1-2022-02-21
3
Note: After setting the WiFi Network, the Wi-Fi/LAN Kit will restart
automatically and the indicator will be o temporarily. The indicator will be on
after restarting.
4
5
Step 2 Connect the app and the inverter.
No. Parameters Description
1 Internet access port For Wi-Fi/LAN Kit only. Select Wi-Fi or LAN.
2 WiFi Network
For WiFi mode only.
Set the parameters based on the router network
information.
3 Encryption
4 Password
5 DHCP
• Enable DHCP when the router is in dynamic IP mode.
• Disable DHCP when a switch is used or when the router
is in static IP mode.
6 IP Address
• Do not congure the parameters when DHCP is enabled.
• Congure the parameters according to the router or
switch information when DHCP is disabled.
7 Subnet Mask
8 Gateway Address
9 DNS Server