Google Nest Protect - Setup and Installation; Get the Nest App; Set Up Nest Protect

2019 | Condential and Proprietary | Do not distribute
Nest Protect 2nd Gen Wired
Tip: Keep Nest Protect in its clear plastic dust cover until installation.
Step 1: Get the Nest app
To download the Nest app and create a free account direct them to the Apple App Store or
Google Play. User may already have an account but make sure it’s the latest version.
Step 2: Add your Protect to the app
The Nest app will guide you through:
● Scanning the Nest Protect QR code
● Connecting to the internet
● Connecting to other Nest Protects in the home
● Connecting additional Protects
Saving the Entry Key for each Protect is recommended. The 6 digit
long code on the back next to the QR code can help the customer
with adding and removing Protects from the app in the future.
Step 3: Turn o power
Be safe and avoid blowing a fuse by either removing the fuse from the fuse box or
switching o the circuit breaker for the room where the Nest Protect is being installed.
Warning: Failure to turn o power can result in serious electrical shock, injury, or death.
Make sure the power light is o on the alarm then twist or maneuver until it
releases. Carefully remove it to keep from damaging the wall or ceiling.
Step 4: Remove old smoke alarm
Note: If there is no old alarm skip to step 8