Goosky GTS User Manual

Aileron agility setting (feed forward)
AIL light is solid on → click SET → AGILE light flashes
Press and hold the SET button for 3 seconds to enter the adjustment mode, short press the SET
button until the indicator light AIL is solid-on and the AGILITY light flashes. The factory default
aileron agility is 5 and you will see the BLUE light flashing 5 times followed by a pause.
You can use the Elevator stick of the transmitter to raise and lower the setting, forward stick
giving a higher setting (higher agility) and back stick to give a lower setting. The number of
consecutive flashes represents the setting level. The highest setting is 9 and the lowest setting is
1 flash (lower agility).
Agility or feed forward controls how much of the direct stick input is acted on by the FBL when
the Transmitter stick is moved. Higher levels will give a more reactive control feel.
After completing setting changes, press and hold the SET button for 3 seconds to exit and save,
then the indicator light turns off and you are ready to fly. Or to move to the next setting, click the
SET button.

Goosky GTS Specifications

General

Brand	Goosky
Model	GTS
Category	Controller
Language	English