Goosky GTS User Manual

Aileron speed setting (rotation rate)
AIL light is solid-on → click SET → SPEED light flashes
Press and hold the SET button for 3 seconds to enter the adjustment mode, short press the SET
button until the indicator light AIL is solid-on and the SPEED light flashes. The factory default
aileron speed is 5 and you will see the BLUE light flashing 5 times followed by a pause.
You can use the Elevator stick of the transmitter to raise and lower the setting, forward stick
giving a higher setting (faster rotation rate) and back stick to give a lower setting. The number of
consecutive flashes represents the setting level. The highest setting is 9 and the lowest setting is
1 flash (slowest rotation rate).
After completing setting changes, press and hold the SET button for 3 seconds to exit and save,
then the indicator light turns off and you are ready to fly. Or to move to the next setting, click the
SET button.

Goosky GTS Specifications

General

Brand	Goosky
Model	GTS
Category	Controller
Language	English