Need help?Do you have a question about the Goosky GTS and is the answer not in the manual?
Explains connecting the external receiver to the flight control unit.
Details the flight control unit's buttons, LED indicators, and ports.
Adjusting rudder rotation speed via transmitter sticks and SET button.
Adjusting rudder gyro gain using transmitter sticks and SET button.
Adjusting elevator rotation speed using transmitter sticks and SET button.
Adjusting elevator agility (feed forward) for control response.
Adjusting elevator gain for flight stability.
Adjusting aileron rotation speed using transmitter sticks and SET button.
Adjusting aileron agility (feed forward) for control response.
Adjusting aileron gain for flight stability.
Setting servo centers for rudder, elevator, and aileron.
Setting collective pitch range from minimum to maximum.
Adjusting rudder center point and travel endpoints.
Introduction to the S1 button for controlling attitude (self-levelling) mode.
Step-by-step guide for calibrating the attitude mode.
Procedure to restore the flight controller to its factory default settings.
How to switch BEC output voltage between 5.5V, 7.5V, and 8.4V.
Explains the function of each port and interface on the flight controller.
General| Brand | Goosky |
|---|---|
| Model | GTS |
| Category | Controller |
| Language | English |
To Next Page