Goosky GTS User Manual

Rudder center / travel settings
Click SET→PITCH light is flashing
Press and hold the SET button for 3 seconds to enter the adjustment mode, short press the SET
button until the indicator light PITCH flashes. Confirm throttle hold is enabled on the transmitter.
Move the throttle/collective stick to the middle position (50%) and use the elevator stick to
change the rudder center point, move the throttle/collective to high (100%) and adjust the tail
end point using the elevator stick, move the throttle/collective pitch to low (0%) to adjust the
other end point.
After completing setting changes, press and hold the SET button for 3 seconds to exit and save,
then the indicator light turns off and you are ready to fly.

Goosky GTS Specifications

General

Brand	Goosky
Model	GTS
Category	Controller
Language	English