Goosky GTS User Manual

Collective pitch setting
Click SET→PITCH light is solid-on
Press and hold the SET button for 3 seconds to enter the adjustment mode, short press the SET
button until the indicator light PITCH is solid-on. Confirm throttle hold is enabled on the
transmitter. Move the throttle/collective stick to the middle position (50%) and zero your blade
pitch with the swash to grip links. Push the throttle/collective stick up to the maximum pitch
setting and use the elevator stick to change the maximum pitch, move the throttle/collective
back to the minimum pitch and use the elevator stick to change the minimum pitch. The factory
setting is plus or minus 12 degrees.
After completing setting changes, press and hold the SET button for 3 seconds to exit and save,
then the indicator light turns off and you are ready to fly. Or to move to the next setting, click the
SET button.

Goosky GTS Specifications

General

Brand	Goosky
Model	GTS
Category	Controller
Language	English