Goosky GTS User Manual

Servo center setting
click SET → SERVO light flashes
Press and hold the SET button for 3 seconds to enter the adjustment mode, short press the SET
button until the indicator light SERVO is solid-on. Use the rudder, elevator and aileron sticks on
the transmitter to set the servo centers. The rudder stick corresponds to CH1, the elevator stick
corresponds to CH2 and aileron stick corresponds to CH3.
After completing setting changes, press and hold the SET button for 3 seconds to exit and save,
then the indicator light turns off and you are ready to fly. Or to move to the next setting, click the
SET button.

Goosky GTS Specifications

General

Brand	Goosky
Model	GTS
Category	Controller
Language	English