Goosky GTS User Manual

Rudder speed setting (rotation rate)
To enter the menu, press and hold SET for 3 seconds → RUD light is solid-on → SPEED light
flashes
With the RUD light solid-on in white and the SPEED blue light flashing, you are reading the rudder
speed setting. The factory default rudder speed is 5, you will see the BLUE light flashing 5 times.
followed by a pause.
You can use the Elevator stick of the transmitter to raise and lower the setting, forward stick
giving a higher setting (faster rotation rate) and back stick to give a lower setting. The number of
consecutive flashes represents the setting level. The highest setting is 9 and the lowest setting is
1 flash (slowest rotation rate).
After completing setting changes, press and hold the SET button for 3 seconds to exit and save,
then the indicator light turns off and you are ready to fly. Or to move to the next setting, click the
SET button.

Goosky GTS Specifications

General

Brand	Goosky
Model	GTS
Category	Controller
Language	English