7
Belt Adjustment
Your Treadmill belt has been adjus ted at the factory
but each user has a tendency to be “Right” or “Left”
footed. If the belt moves to either side ,It needs to be
adjusted.
There are two adjustment bolts at the rear of the
unit(see PIC.3).Tighten by half a turn the bolt on the
side tow ards which the belt has shifted and
correspondingly loosen the bolt on the other side.
Rotatethebeltsmoothlytoensurethatitiscorrectly
cente
ed-if not ,r epea t the ad
ustment.
Maintenance
The belt may be cleaned by a mild soap an d water. Be sure to remove any excess water after cleaning.
Clean the running board under the belt periodically with a household furniture polish. After cleaning,a
small amount of silicone spray(available from m otor shops) should placed on the surface of the running
board to allow the belt to slide more easily.
To Next Page
Loading...
