GoPro HERO7 WHITE - Quick Start Manual

Find the full manual at: www.cadl.org/gopro
SETUP
INSTALLING YOUR MICRO SD CARD
1. Hold down the Latch Release buon on
the side door, then slide the door open.
Please refrain from forcing the door.
2. With your camera o, insert the SD card
into the card slot with the label facing the
USB port.
You can eject the card by pressing it into the
slot with your ngernail.
CHARGING THE BATTERY
1. Hold down the Latch Release buon on
the side door, then slide the door open.
Please refrain from forcing the door.
2. Connect your camera to the USB charger
provided using the included USB-C cable.
It takes about 2 hours for the baery to fully
charge.
POWERING ON POWERING OFF
Press the Mode
buon to turn on the
HERO7 White.
Press and hold the
Mode buon to turn
it o
The GoPro App is available
free for iPhone or Android. It
is not required to use the
GoPro.