10
POWERING THE REMOTE ON/OFF
To Power On the Remote:
Press the Power/Mode button [
].
To Power Off the Remote and Connected Cameras:
Press and hold the Power/Mode button [
] for two seconds.
Note: If the cameras are recording, this action powers off only the remote. The cameras continue recording.
PRO TIP: You can power off the remote and leave the camera powered on.
This option is useful if you want to switch from the remote to the GoPro App
to control your camera. To use this option, press and hold the Power/Mode
button [
] and the Settings/Tag button [ ] together for two seconds.
To Next Page
Loading...
