GoPro Smart Remote - Connecting the Remote to Your HERO3+;HERO3

19
d. Press the Power/Mode button [ ] to cycle to Existing, and
then press the Shutter/Select button [
] to select it.
To Connect the Remote and Your HERO3+ or HERO3:
1. Power on the remote and your camera.
2. On your camera, complete these steps:
a. Press the Wireless button [
] twice to turn on Wireless and
open the Wireless settings.
b. Press the Shutter/Select button [
].
c. Press the Power/Mode button [ ] to cycle to Wi-Fi RC, and
then press the Shutter/Select button [
] to select it.
d. Press the Shutter/Select button [ ] to select Current.