23
6. To go back or exit the settings menu, press the Settings/Tag
button [
].
To Change Camera Settings for HERO3+ and HERO3:
1. Be sure your camera and remote are powered on and connected.
2. Press the Power/Mode button [
] to cycle to Settings.
3. Press the Shutter/Select button [ ] to select Settings.
4. Press the Power/Mode button [ ] to cycle through the settings.
5. Press the Shutter/Select button [ ] to select an option.
6. To exit the settings menu, press the Power/Mode button [ ] to cycle
to EXIT, and then press the Shutter/Select button [
] to select it.
To Next Page
Loading...
