What to do if water is leaking from Gorenje COMBI FS600 Refrigerator?
If water is dripping or leaking from your Gorenje refrigerator, it could be due to a clogged water discharge opening or water dripping past the water gutter. Try cleaning the blocked opening, for example, by using a plastic straw. If a thick layer of ice builds up, defrost the appliance manually.
What to do if there is excessive ice build-up on the back wall of my Gorenje COMBI FS600?
Excessive ice build-up on the back wall of your Gorenje refrigerator's interior can occur if the door is opened too frequently or for too long, warm food is placed inside, food or containers are in contact with the back interior wall, or the door isn't sealing properly. If the seal is dirty or damaged, clean or replace it.
What to do if Gorenje COMBI FS600 Refrigerator is not working?
If your Gorenje refrigerator is connected to the power mains but not working, make sure there is voltage in the power outlet and that the appliance is switched on.
How to fix Gorenje COMBI FS600 LED lighting?
If the LED lighting in your Gorenje refrigerator does not work, call a service technician.
Why is the door of my Gorenje Refrigerator difficult to open?
If you find the door of your Gorenje refrigerator difficult to open, especially right after closing it, it's likely due to negative pressure. When you open the door, cool air escapes and is replaced by warm air, which then cools down, creating this pressure. After a few minutes, the condition normalizes, and the door can be opened easily again.
What does HI on Gorenje Refrigerator display mean?
If 'HI' appears on the display unit of your Gorenje refrigerator, it could be due to the door being opened too frequently or for too long, the door not being closed correctly (possible impurities on the seal, misaligned door, damaged seal etc.), an extended power supply failure, or too much fresh food being inserted at once.
What does PF mean on Gorenje Refrigerator display?
If 'PF' appears on the display unit of your Gorenje refrigerator, it indicates an extended power failure.
What does it mean when signal light above the 7 indicator flashes on Gorenje Refrigerator?
If the signal light above the 7 indicator flashes on your Gorenje refrigerator, it means the door was open for too long. Close the door.
What does E0 mean on Gorenje Refrigerator display?
If 'E0' appears on the display unit of your Gorenje refrigerator, it indicates that the sensor keys are not responding. Call a service centre for repair.
What does E1 or E2 mean on Gorenje Refrigerator display?
If 'E1' or 'E2' appears on the display unit of your Gorenje refrigerator, it indicates a temperature sensor error or fault. Call a service centre for repair.
Guidelines for choosing a suitable location for appliance installation, considering temperature and ventilation.
Overview of the interior components and features of the conventional appliance model.
Overview of the interior components and features of the NoFrost appliance model.
Explanation of the controls and functions available on the interior control unit.
Instructions for adjusting and using the interior shelves in the refrigerator.
Steps and guidelines for correctly freezing fresh food in the freezer compartment.
Steps for manually defrosting a conventional freezer compartment.
General| Appliance placement | Freestanding |
|---|---|
| Product colour | White |
| Number of shelves | 4 |
| Reversible doors | Yes |
| Weight | 60 kg |
| Climate class | SN-T |
| Width | 60 cm |
| Type | Fridge freezer |
| Freezer star rating | 4 stars |
| Defrost system | Manual |
To Next Page