To clear the display:
Your pager unit, once the alarm has been activated by any number of security
features, will continue to show the icons on the LED screen. Follow the step below
to clear the screen of these icons.
STEP 1
Press the set button 3 times within the 3 seconds. This will clear the display.
Button Lock Mode:
Designed to prevent accidental pressing of buttons.
STEP 1
To activate press button and quickly press and hold button for 3 seconds.
You will see the key icon indicating buttons are locked.
STEP 2
To exit button lock mode. Press and hold the button and within 2 seconds
press and hold the lock button for 3 seconds. The key icon will disappear.
For all Gorilla Cycle Alarm features refer to section 1 (page 6)
16
m
v
Ordering 5-Button 2-way Pager
To order an additional pager, send $85.00
(includes shipping and handling) to:
Also by using your VISA or MasterCard, call (800) 262-6267.
Gorilla Automotive Products
2011 E. 49th Street
Los Angeles, CA 90058
(323) 585-2852
Part # 8017-5B
To Previous Page
Loading...