ASSEMBLY PRINCIPLES
• To comply with the Working at Height Regulations, we show assembly
procedures with platforms at every 2 metres in height, and the location of
guardrails in advance of climbing onto a platform to reduce the risk of a
fall.
• All platforms feature double guardrails on both faces of either individual
platforms or fully decked levels.
• All guardrails should be 1 and 2 rungs (0.5m and 1.0m) above platforms.
• Never stand on an unguarded platform.
DISMANTLING PRINCIPLES
To dismantle your Gorilla Scaold:
• Remove toe boards, and pass down the scaolding.
• Unclip farthest end of braces and immediately go to protected trapdoor
position on ladder to complete removal.
• Remove upper platforms from protected platform levels below.
• Pass removed components out of the scaold to an assistant.
MAINTENANCE
• All components and their parts should be regularly inspected to identify
damage, particularly to welds. Lost and/or broken parts should be
replaced, and any tubing with indentations greater than 5mm should be
aside for repair.
• Adjustable wheel threads should be cleaned and lightly lubricated to keep
them free running.
5
www.gorillaladders.co.nz
To Next Page
Loading...
Need help?
General