Gosafe G1C - Functions

6
2.2 Functions
Functions
Function details
Description
Tracking
Real time tracking
According to the stetted time update the Long
and Lat information.
Tracking
Fix distance tracking
According to the stetted distance update the
Long and Lat information.
Vehicle
status
detection
Vibration alarm
In static status, when ACC is off and
static status is lasting for at least 1
minute, if vibration is exceed the
threshold, it have alarm.
Collision alarm
When device is located, if the vibration
value exceed the threshold, it will have
alarm and upload the messages of
before and after the collision
Low power alarm
When device checking the voltage is 5-
10V and last for 20s it will have alarm
Over speed Alarm
When speed is over than the set speed,
device will send message to user.
Under voltage Alarm
When the voltage is below 5V or
disconnected to main power for 20s, it will
send a alarm location message to platform
Geo-fence
You can use the mouse to draw a circle on
the platform to set the Geo-fence, if the car
drive over that circle, the device will send
the message to the server to remind you.
Other
functions
Blind area uploading data
Storage and it will upload the data
when the signal is regular
SMS query function
Check the position of the device by sending
SMS
Inflexion upload
When the angle that vehicle turned is more
than a normal scale it will send a message to
optimize the playback
Remote upgrading
With a software