Gosafe G2P - User Manual

G2P User Manual v1.0
Copyright © 2014 Gosafe

Summary

Safety Guidelines

Device Specifications

Features and Events

Getting Started

LED Indicator Behavior

User Commands

UNO0 Command: Set User Phone Number

Sets the primary user phone number authorized to interact with the tracker.

UPW0 Command: Change Password

Changes the default password for the primary user phone number.

USP0;0 Command: Set Report Mode 0

Configures report mode 0 for the primary user, specifying interval and position parameters.

USP0;1 Command: Set Report Mode 1

Configures report mode 1 for the primary user, specifying interval and position parameters.

UNO1 Command: Set Secondary User Phone Number

Sets the secondary user phone number authorized to interact with the tracker.

UPW1 Command: Change Secondary Password

Changes the password for the secondary user phone number.

USP1;0 Command: Set Report Mode 0 (User 2)

Configures report mode 0 for the secondary user, specifying interval and position parameters.

USP1;1 Command: Set Report Mode 1 (User 2)

Configures report mode 1 for the secondary user, specifying interval and position parameters.

PRQ Command: Query Current Position

Requests the tracker's current location, typically returned as a map link.

APN Command: Set GPRS Network Info

Configures Access Point Name (APN) details for GPRS network connection.

SVR Command: Set GPRS Host Server

SVP;0 Command: Set Report Mode 0 (GPRS Host)

SVP;1 Command: Set Report Mode 1 (GPRS Host)

GFS Command: Define Geo-fence

Gosafe G2P Specifications

General

Brand	Gosafe
Model	G2P
Category	GPS
Language	English