Gosafe G2P - UNO1 Command: Set Secondary User Phone Number; UPW1 Command: Change Secondary Password; USP1;0 Command: Set Report Mode 0 (User 2)

7
BAT 60%
#1
<Report interval>:
Range is from 30S to 900S, 15M to 59M, 1H to 720H.
S = Second
M = Minute
H = Hour
<Parameter1>:
G = GPS position preferred.
O = Disable position report.
<Parameter2>:
T = Position is shown in text.
W = Position is shown is hyper link.
Note: O is letter.
5.Command UNO1
This command is to set user phone number#2 that has authority to interact with tracker.
Example:
Phone number: 13800138000, country code: +86
1234,UNO1;+8613800138000
Tracker
User SMS
G2P V1.00
UNO1:+8613800138000
BAT 60%
#1
6.Command UPW1
This command is to change the default password 1234 for user phone number#2, 4 digits fixed.
1234,UPW1;5678
Tracker
User SMS
G2P V1.00
UPW1:5678
BAT 60%
#2
7.Command USP1;0
This command is to set report mode0 for user phone number#2
1234,USP1;0;30S;G;W
Tracker
Remark
User SMS
G2P V1.00
USP1:0;30S;G;W
BAT 60%
#1
USP1;0;<Report interval>;<Paramter1>;<Paramter2>
<Report interval>:
Range is from 30S to 900S, 15M to 59M, 1H to 720H.
S = Second
M = Minute
H = Hour
<Parameter1>:
G = GPS position preferred.