Gosafe G2P - SVP;0 Command: Set Report Mode 0 (GPRS Host); SVP;1 Command: Set Report Mode 1 (GPRS Host)

10
15.Command SVP;0
This command is to set report mode0 to GPRS host server.
1234,SVP;0;30S;G;T
Tracker
Remark
User SMS
G2P V1.00
SVP:0;30S;G;T
BAT 60%
#1
SVP;0;<Report interval>;<Paramter1>;<Paramter2>
<Report interval>:
Range is from 30S to 900S, 15M to 59M, 1H to 720H.
S = Second
M = Minute
H = Hour
<Parameter1>:
G = GPS position preferred.
O = Disable position report.
A = GPS and LBS position.
<Parameter2>:
T = Position is shown in text.
16.Command SVP;1
This command is to set report mode0 to GPRS host server.
1234,SVP;1;30M;G;T
Tracker
Remark
User SMS
G2P V1.00
SVP:1;30M;G;T
BAT 60%
#1
SVP;1;<Report interval>;<Paramter1>;<Paramter2>
<Report interval>:
Range is from 30S to 900S, 15M to 59M, 1H to 720H.
S = Second
M = Minute
H = Hour
<Parameter1>:
G = GPS position preferred.
O = Disable position report.
A = GPS and LBS position.
<Parameter2>:
T = Position is shown in text.
17.Command SOS
This command is to toggle SOS button pressed event.
1234,SOS;1
Tracker
Remark
User SMS
G2P V1.00
SOS:1
BAT 60%
#6
SOS;<Parameter>
<Parameter>:
0 = Disable SOS button.
1 = Enable SOS button.