Gosafe G2P - Getting Started

4
5. Getting started
5.1. Install SIM card
1
Remove cover at the shown
direction from here.
2
Flip up battery from here to find
the SIM card holder.
3
Step1:
Release SIM holder at shown
direction.
Step2:
Insert SIM card to SIM holder,
Metal part of SIM card facing to
PCB board.
Step3:
Lock SIM card holder at shown
direction.
Step4:
Align contact point to install
battery back.
5.2. Set up by SMS command
Please refer chapter 7 “User command”.