Gosafe G2P - APN Command: Set GPRS Network Info; SVR Command: Set GPRS Host Server

9
11.Command TZN
This command is to set local time.
1234,TZN;08:00
Tracker
Remark
User SMS
G2P V1.00
TZN:08:00
BAT 60%
#6
TZN;<Time zone>
<Time zone>:
Format is HH;MM, range from -13:00 to 13:00.
12.Command DNU
This command is to set switching condition for report mode0 and report mode1.
1234,DUN;3
Tracker
Remark
User SMS
G2P V1.00
DNU:3
BAT 60%
#6
DNU;<Parameter>
<Parameter>:
0 = Always stick with mode0.
1 = When roaming switch to mode1, otherwise stick
with mode0.
2 = When battery low switch to mode1, otherwise
stick with mode0.
3 = Either roaming or battery low will switch to
mode1, otherwise stick with mode0.
13.Command APN
This command is to set necessary information to connect with GPRS network.
1234,APN;CMNET;123;456
Tracker
Remark
User SMS
G2P V1.00
APN:CMNET;123;456
BAT 60%
#6
APN;<APN name>;<Username>;<Password>
14.Command SVR
This command is to set GPRS host server IP and port
1234,SVR; 76.74.174.164;3032;;0
Tracker
Remark
User SMS
G2P V1.00
SVR:76.74.174.164;3032;;0
BAT 60%
#6
SVR;<IP>;<TCP port>;<UDP
port>;<Mode>
<IP>:
Host server IP or domain name.
<TCP port>:
Available TCP port
<UDP port>:
Available UDP port
<Mode>:
0 = Using TCP protocol
1 = Using UDP protocol