gosund SP211 - AP Mode Connection

6
B. AP Mode
1. Please switch to “AP Mode” if the connection fails in “Easy Mode”.
2. Press and hold the on/off button until the indicator light flashes
slowly.
3. Make sure the indicator light is flashing slowly, confirm in the
app.
4. Choose your 2.4G WiFi, enter your password and confirm in the
app.
5. Tap “Connect now” and choose the WiFi hotspot named
“Smartlife-XXX”, then go back to the SmartLife application.
6. Finally, wait for the product to successfully configure and tap
“Completed”.
Note: If the connection fails in “AP Mode”, please check if your router
utilizes dual-band WiFi. If it does, please enter the router
management interface to split 2.4G and 5G with WiFi, and then
connect 2.4G WiFi.