5. Unplug the charger and screw the plastic cap onto the device ensuring
a firm fit. Now you're ready!
WARNING: Do not operate the device out of the water as it may damage
some components.
Press to start cleaning
6. At your pool, press the button, and the blue LED indicator will blink for ten
seconds. Place your device into the water, and rock it side-to-side to help
any air trapped in the body to escape, then fully submerge the device.
7. If you need to stop the cleaning process for any reason, you can manually
shut the device down by pressing the button for three seconds.
8. After your device has completed its cleaning cycle, it will automatically park
near your pool's wall. Use the provided hook to retrieve the device.
9
To Next Page
Loading...
