3.2 Cleaning the Filter Bag
1. Place the device on the ground, top side down.
2. Press the two red tabs at the front of the device inwards and towards the front.
3. Press in the two red clips at the read and lift up the lid.
4. Pull the red ribbon near the front marked "PULL TO REMOVE BAG."
5. Empty any debris inside the bag.
6. Flip the bag inside out and use a hose to spray the bag to remove any linger-
ing debris. In some instances, washing the bag by hand may be necessary.
7. Hose clean the lid and body of the device.
8. Return the bag to its original position and return the cleaned filter back into the lid.
9. Starting with the sides, attach the lid back to the device's body and secure the
tabs in reverse order. Ensure the body is properly latched and snuggly fits
with the base of the device.
10
To Previous Page
Loading...
