If you have questions or concerns about any of these steps, please feel free
to contact our Customer Service Team at support@gotrax.com . Someone
will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for installing the
Gotrax Hoverkart onto your electric scooter. Read the remainder of this
manual before riding your Gotrax Hoverkart.
Your Gotrax Hoverkart should be completely assembled prior to installing
it onto your electric scooter. Please refer to the “Assembling your Gotrax
Hoverkart” section for assembling procedures.
BEFORE ATTACHING YOUR HOVERKART to your hoverboard, you
must ensure that you have turned off the self-balancing mode.
To turn o self balancing mode on your GOTRAX hoverboard, rst
power on your hoverboard.
Once the GOTRAX Hoverboard is powered on, press the power
button for 2 seconds. You will hear a loud beep that signals that the self-
balancing mode is turned off.
Installing your hoverboard
To Next Page
Loading...
Need help?
General