11
BEFORE FIRST USE & ASSEMBLY
1. Place the Cut + Dry Dehydrator on a level, at surface that is clean and
dry.
2. Ensure that the Cut + Dry Dehydrator is several inches away from
obstructions, such as walls, cabinets, doors, and other appliances.
3. Wash the Drying Trays in warm, sudsy water. Dry thoroughly.
4. Use a soft damp cloth to clean the exterior of the Cut + Dry Dehydrator
and EasyVue Door. Dry with a paper towel or soft cloth.
5. Read safety instructions.
6. Press the ON/OFF Icon to start the Cut + Dry Dehydrator drying process.
Dry the interior and Drying Trays for 30 minutes before adding food. This
helps dry the interior for initial use. Smoke or odors are normal during the
initial 30 minute drying time. Allow sucient ventilation.
7. Insert Drying Trays into the Cut + Dry Dehydrator and enjoy!
11
BEFORE FIRST USE & ASSEMBLY
To Next Page
Loading...