GPI M30 - Page 5

5
GETTING STARTED
ASSEMBLY /
INSTALLATION
OPERATION MAINTENANCE
EN
SAFETY /
SPECIFICATIONS
SPECIFICATIONS
(
CONTINUED
)
M30-G6N, M30-G8N, & M30-
G8B (GALLON MODEL)
M30-L6N, M30-L8N, &
M30-L8B (LITRE MODEL)
Unit of Measure U.S. Gallon Litre
Flow Range 5 to 30 GPM 19 to 114 L/min
Operating Temperature -20° F to 125° F -29° C to 52° C
Typical Accuracy ± 2%
Technology Nutating Disc
Housing, Cover, Fittings Aluminum
Maximum Working
Pressure
50 PSIG / 3.4 bar
Pressure Drop (at Max.
Flow)
Diesel: 7.0 PSI / 0.5 bar
Unleaded: 5.0 PSi / 0.3 bar
Inlet/Outlet Threads 3/4 in. NPT or 1 in. NPT or 1 in. BSPP
Maxium Batch Total 999.9
Maximum Cumulative
Total
999,999.9
Weight 8.1 lbs 3.7 kg
Maximum Dimensions
Width: 5.9 in. 15.0 cm
Height: 7.9 in. 20.0 cm
Depth: 5.3 in 13.3 cm
Wetted Materials
Nutator Assembly PBT (Polybutylene Terephthalate), Stainless Steel
Seals NBR (Nitrile Butadiene Rubber)
Mag-Drive Acetal, Stainless Steel, Neodymium (Nickel Plated)
Approvals
NOTE: Accuracy is factory calibrated using diesel fuel. Field calibration is available on
all models.