GPO 746 - Firmware Upgrade

Firmware Upgrade
Force Upgrade: (Default, Disable)
EnabletoforcethephonetoupgradeviatheServerIPaddressmanually.
Auto Upgrade: (Default, Enable)
Enabletoautoupgradeafterbootinguponceif“Interval”is0.If“Interval”isn’t0,thenit
checksperiodicallyandautoupgradeifanewrmwareisfound.
Server IP:
TheIPaddressinformationoftheserverfordownloadingthermware.Itcanbetftp://IP.ad-
dress.of.tftp,ftp://IP.address.of.ftporhttp://IP.address.of.http
Server File Path:
Thelenameofthermwareintherootfolderoftheserver
Server Username:
Usernameforloginingintotheftporthehttpserver
Server Password:
Passwordforloginingintotheftporthehttpserver
Interval:
Autoupgradeperiod(seconds);Itmeanshowlongthephonegoescheckthermwareon
theserver.Ifthermwareisdierentfromthecurrentone,thephonewillthenrebootfor
updating.
8
GPO WEB CONFIGURATION