Need help?Do you have a question about the GPO PR100 and is the answer not in the manual?
Ensure all connections are correct before plugging the unit into power supply.
Unpack and set up the GPO PR100 turntable, including platter installation.
Sets the anti-skating dial to zero for proper stylus tracking and playback.
Details the acceptable voltage and power supply requirements for the unit.
Instructions for powering off the unit and storing the turntable after use.
Instructions for selecting the PHONO/EQ THRU setting for amplifiers without Phono inputs.
Explains how to fine-tune the vinyl playing speed using the Pitch Adjust Control.
To Next Page
General
