Customer Support: 1-888-999-4215 GPX 9
Loading a CD Programming a CD
Playing a CD
1. Open the CD DOOR.
2. Place a CD into the boombox, label
side facing up.
3. Close the CD DOOR.
1. Follow the instructions for Loading
a CD and Playing a CD.
2. Press the STOP button to stop the
CD during play.
3. Press the PROG button.
“01” will begin to blink on the
display.
4. Press the SKIP/SEARCH buttons to
select a track.
5. Press the PROG button to save the
selected track to the program.
6. Repeat steps 4 and 5 to program
up to 20 tracks.
1. Follow the instructions for Loading
a CD.
2. Adjust the LINE IN/RADIO/CD/
POWER (OFF) switch to CD.
3. Press the PLAY/PAUSE button to
begin playing the loaded CD.
CD
To Next Page
Loading...
