GPX C226 - Power & Battery; Powering the Unit; Battery Backup; Clock & Sleep Timer

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección
de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective
owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Setting the Alarm
1. If in radio mode, press and hold the Power/Source/AL OFF button to turn
the unit o.
2. Press and hold the AL1 or AL2 button until the display begins to blink.
3. Press the Hour button to set the hour. The PM indicator will light when the
hour is set in the PM.
4. Press the Min button to set the minutes.
5. Press the AL1 or AL2 buttons to select Radio, Buzzer, or Alarm OFF.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm not
currently set.
An AM/FM antenna is built into the clock radio. To improve radio reception, adjust
the position of the clock radio.
Tuning the AM or FM Radio
1. Press the Power/Source/Al O button to turn the clock radio on.
2. Press the Power/Source/Al O button again to switch between the AM and
FM radio mode.
3. Press the Tun+/− buttons to adjust the radio to the desired frequency.
4. Press and hold the Tun+/− buttons to search for the next available
frequency.
5. Press the Vol+/− buttons to adjust the volume.
6. Press and hold the Power/Source/Al O to turn the radio o.
Clock & Sleep Timer
Alarm
Radio
Setting the Clock
1. If in radio mode, press and hold the Power/Source/Al O button to
turn the unit o.
2. Press and hold the Clock/Mem button until the display begins to blink,
then release the button.
3. Press the Hour button to adjust the hour. The PM indicator will light when the
hour is set in the PM.
4. Press the Min button to adjust the minute.
5. Press the Clock/Mem button to nish setting the time.
Setting the Sleep Timer
1. Power ON the unit and press the Sleep button repeatedly to set the sleep
timer ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
2. Once the set sleep time has expired the clock radio will automatically
power o.
Disabling the Alarm
1. Press the AL1 or AL2 buttons repeatedly until the indicator is no longer lit.
Snooze and Alarm Reset
After the alarm sounds:
Press the Snooze button to delay the alarm for an additional 9 minutes.
OR
Press the Power/Source/Al O button to turn the alarm o
until the set alarm time is reached again.
Saving Radio Presets
1. Tune to the desired station.
2. Press and hold the Clock/Mem button. When the display begins ashing,
press the Tuning/Hr/Min buttons to select a preset (P01-P10).
3. Press the Clock/Mem button to save the station to the preset.
4. After saving a preset, you can press the Clock/Mem to cycle through you
saved preset stations.
Power & Battery
Requires 2 AAA batteries (not included).
The battery backup is intended for short power outages only. The clock
radio’s primary functions cannot run o of the battery backup alone.
To power the unit, plug the power cord on the back of the unit into a
standard AC power outlet.