11
Using the Aux Input (3.5mm Audio Input)
Requires 3.5 mm audio input cable (not included).
1. Plug a 3.5 mm audio input cable into the Aux In on the unit and the audio output/headphone output on an
MP3 Player or other audio source.
2. Set the Source Selector to Aux In Mode.
Indicated by a green light on the Bluetooth/Aux LED in the display area.
3. Audio played through the connected device will now be heard through the speakers.
±ÈÀý
1.000
Aux In
Pairing a Bluetooth Device for the First Time
1. Set the Source Selector to and press and hold the Play/Pause/Pair button.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, search for and select JB185 in your Bluetooth settings to pair. If
your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
3. When successfully paired and connected, an audible chime will sound and the Pairing Indicator will display
a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps or press &
hold the Play/Pause/Pair button again.
Playing Audio Wirelessly
4. After pairing to a bluetooth device, use the controls on your connected Bluetooth Device to
select a track.
5. Play, pause or skip a selected track using the controls on the connected Bluetooth Device or the controls on
the karaoke machine.
6. Audio played through the connected Bluetooth device will now be heard through the speakers.
Bluetooth
To Next Page
Loading...
