9
Automatic Voice ControlLoading a Disc
CD and CD+G
1. Press the Open/Close
button on the CD door.
2. Load a CD, CD-R/RW, or CD+G
disc into the karaoke machine,
label side facing up.
3. Close the CD door.
The AVC (Automatic Voice Control)
dial adjusts the volume of the unit
to compensate for varying levels
of volume from the microphone.
Turn the dial to adjust the degree to
which the Automatic Voice Control
compensates for variations in volume.
To manually adjust voice control
use the Echo and Balance knobs
on the front of the unit.
Playing a Loaded Disc
Programming a Loaded Disc
1. Follow the instructions
for Loading a Disc.
2. Adjust the Source switch
to CD+G mode.
3. Plug the included microphone
into the Mic 1 or Mic 2 inputs.
4. Press the Play/Pause button to
begin playing the loaded disc.
1. Follow the instructions for Loading
a Disc and Playing a Loaded Disc.
2. Press the Stop button to
stop the loaded disc.
3. Press the Program button.
4. Press the Skip/Search buttons to
select a track from the loaded disc.
5. Press the Program button to add
the selected track to the program.
6. Repeat steps 4 and 5 to program up to
20 tracks to play in a specied order.
7. Press the Stop button to
cancel a program.
To Next Page
