EasyManua.ls Logo

grabner ADVENTURE - Thigh belts; Inner bags; Seatboard-cushionbag; Trimaran sails

grabner ADVENTURE
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Thigh belts:
Thigh belts give you optimum hold when
paddling the boat. You cannot slip from
your seat, but you are able to cant the boat,
which is a vital condition for travelling on
difficult waters.
ATTENTION: D-Ring fittings for thigh
belts only standard for ADVENTURE.
Inner bags:
The waterproof welded bags, with a semi-
waterproof zipper, be fixed with the belt on
the seat board eyes or stainless D-rings.
Seatboard-cushionbag:
The seatboard-cushionbag have two
functions. For cushion of the seatboard and
for handy storage of important luggage. Put
of the bag on the seat board.
ATTENTION: When you use the
seatboard-cushion bag you dont can kneel
in the boat.
Trimaran sails:
Your ADVENTURE is easy to make into a
sailing boat.
To mount the rudder you have to drill two
holes in the stern reinforcement.
ADVENTURE ECONOMY:
To fix the main sheet you have to glue 1
fitting on the boat.
ADVENTURE SL:
To fix the main sheet you have to glue 1
fitting on the boat.
You have well to change 2 distance pieces
from the fixing box.
Assembly details are set out in the user
instruction
Outrigger and motor mounting:
The outrigger gives the boat totally
protected against capsizing. You can use
the outrigger on one or both sides. Ideal
when climbing back in after swimming,
trips with children, for fishing or when a
side motor is used.
With the outrigger and motor mount you
can use a motor up to 2,2kW /3 HP and 17
kg.
ATTENTION: Check the statutory
regulations of the country or region.
Assembly details are set out in the user
instruction
Safety Floats:
With the both floats, left and right on the
boat, is the boat more stability of tipping
over. To fit the floats, it is necessary to
glue 12 fittings on the boat.
Stabilizing fin:
The stabilizing fin enhanced to hold the
course and reduce the rolling motion. You
have to glue one fitting on the floor. You
can remove the fin anytime.
IMPORTANT:
There are many further accessories for the
boat. The exact information may be found
in the GRABNER INFLATABLE BOATS
CATALOGUE.

Related product manuals