Need help?Do you have a question about the Grabo OTTOVAC and is the answer not in the manual?
General| Charging Time | 2 hours |
|---|---|
| Operating Time (full charge) | 1.5 hours |
| Max. Lifting Load | 200 kg |
| Dimensions | 11.7 x 7.2 x 4.5" (297 x 184 x 114 mm) |
| Maximum Lifting Capacity | 200 kg |
| Power Consumption | 16W |
| Battery | Li-ion |
| Operating Temperature | 0°C to 45°C |
| Power Supply | 100-240VAC, 50/60Hz |
Contact and location details for GRABO's US operations.
Information about the GRABO factory located in Huizhou, China.
Details for the GRABO R&D and Innovation center in Israel.
Global distribution hub for GRABO tools located in Hong Kong.
Logistics and engineering operations for GRABO in Shenzhen, China.
General safety precautions and warnings applicable to all power tools.
Safety guidelines for maintaining a safe and clean work environment.
Precautions related to electrical safety when using the power tool.
Guidelines for proper use and maintenance of the power tool.
Key safety instructions for operating the OTTOVAC device.
Instructions for replacing the air filter on the OTTOVAC device.
To Next Page
