Graco 250 Series - Service - Swivel Assembly; Swivel Assembly Service

18 308899
Service
Swivel
1. Relieve the pressure.
INJECTION HAZARD
To reduce the risk of serious injury
whenever you are instructed to relieve
pressure, always follow the Pressure
Relief Procedure on page 16.
WARNING
2. Disassemble the parts as shown in Fig. 14 or
Fig. 15, depending on your hose reel model.
Clean the parts, and inspect them for wear or
damage.
3. Grease the new parts, and lubricate the cavity of
the swivel assembly (34) with high-quality grease.
Install the parts as shown in Fig. 14 or Fig. 15.
Fig. 14 High-Pressure Hose Reel
1645
34
39
46
12
20
15
11
15
12
20
PACKING DETAIL
Fig. 15 Low- and Medium-Pressure Hose Reels
39
34
15
20
15
11
12
15
20
O-ring MUST be cradled
in backup o-ring
PACKING DETAIL
15
Lubricate cavity
with grease
1
3
2
1
1
Lips of v-packings
MUST face reel flange
2
3
48
48
03726
21
21