Graco 350 Series User Manual

308–400
Rev . E
Supersedes Rev. D
Includes PCN E changes
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
SERIES 350 HOSE REELS
WARNING
These hose reels are designed to dispense lube
products, air , water , transmission fluid, or
antifreeze only . Any other use of these hose
reels can cause unsafe operating conditions and
result in component rupture, fire or explosion,
which could cause serious bodily injury , including
fluid injection.
NOTE: These hose reels are for stationary mountings
only and cannot be used with enclosures.
See page 2 for the Table of Contents.

Low Pressure, Standard Mount
Models Hose Length Maximum W orking
Pressure
238–211 40 ft (12.2 m) 180 psi (12.4 bar)
238–213 60 ft (18.3 m) 180 psi (12.4 bar)
Medium Pressure, Standard Mount
Models Hose Length Maximum W orking
Pressure
237–020 none 1800 psi (126 bar)
237–021 40 ft (12.2 m) 1800 psi (126 bar)
237–022 50 ft (15.2 m) 1800 psi (126 bar)
238–209 50 ft (15.2 m) 1800 psi (126 bar)
High Pressure, Standard Mount
Models Hose Length Maximum W orking
Pressure
237–030 none 8000 psi (560 bar)
237–031 40 ft (12.2 m) 5000 psi (350 bar)
237–032 50 ft (15.2 m) 5000 psi (350 bar)
237–033 40 ft (12.2 m) 4000 psi (280 bar)
237–034 50 ft (15.2 m) 4000 psi (280 bar)
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
COPYRIGHT 1990, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001

Graco 350 Series Specifications

General

Brand	Graco
Model	350 Series
Category	Tools
Language	English

Summary

Series 350 Hose Reels

Low Pressure, Standard Mount Hose Reels

Details on low-pressure hose reels with standard mount.

Medium Pressure, Standard Mount Hose Reels

Details on medium-pressure hose reels with standard mount.

High Pressure, Standard Mount Hose Reels

Details on high-pressure hose reels with standard mount.

Safety and Warnings

Warning Symbols and General Hazards

Explanation of warning symbols and equipment misuse hazards.

Injection Hazards

Information on fluid injection risks and safety precautions.

Toxic Fluid Hazards

Information on toxic fluid hazards and handling.

Fire and Explosion Hazards

Precautions regarding fire and explosion risks.

Installation

Typical Installation

Guide to typical installation setup for overhead mounting.

Roller Support Arm Adjustment

Procedure for changing the position of the roller support arm.

Hose Reel Mounting Options

Covers various mounting methods like ceiling and wall.

Installing the Hose

Step-by-step guide for attaching the hose to the reel.

Adjusting Spring Tension

Procedure for setting correct spring tension for hose retraction.

Maintenance

Pressure Relief Procedure

Steps to safely relieve pressure before servicing.

Replacing the Service Hose

Instructions for removing and replacing the service hose.

Hose Reel Lubrication

Recommended lubrication schedule and points.

Service

Swivel Assembly Service

Procedures for servicing the swivel mechanism.

Reel Spring Service

Steps for servicing or replacing the reel spring.

Latch Mechanism Service

Instructions for maintaining the latching mechanism.

Parts Identification

Low/Medium Pressure Parts List

Detailed list of parts for low/medium pressure models.

Low/Medium Pressure Parts Drawing

Visual representation of parts for low/medium pressure models.

High Pressure Parts List

Detailed list of parts for high pressure models.

High Pressure Parts Drawing

Visual representation of parts for high pressure models.

Accessories

Mounting Accessories

Components for mounting hose reels to various structures.

Hose Inlet Kits

Kits for connecting fluid supply to the hose reel.

Dispensing Valves

Various types of dispensing valves for different applications.

Technical Data and Warranty

Technical Data

Specifications for low, medium, and high-pressure hose reels.

Warranty and Disclaimers

Details on Graco's warranty policy and disclaimers.