30 308899
Mounting Accessories
Must be purchased separately. Use only genuine Graco parts and accessories.
Order mounting hardware using sections 1 through 2b below. For enclosed reels, order mounting hardware as
needed per items 1 and 2a. For open reels, order mounting hardware as needed per items 1 and 2b.
1: Mounting Bracket 204741 for Either
Open or Enclosed Reels
Secures mounting channel to I-beam without holes
drilled in I-beam. Bracket fits all standard I-beams with
flanges up to 7 in. (178 mm). Mount the bracket to the
mounting channel before securing it to the I-beam.
This mounting bracket will work on 1- to 6-reel
mounting channels. Screws, lockwashers, and nuts
are included.
NOTE:
For one to three reels, two of 204741 are required.
For four to six reels, three of 204741 are required.
1655
adjustable clamps
I-beam
mounting
bracket
mounting channel
2a: Mounting Channels for Enclosed
Reels
For mounting enclosed hose reels to ceiling. Includes
capscrews (3/8–16 UNC–2a x 0.625”), lockwashers,
and weldnuts on channel.
203521 for 1 reel
203522 for 2 reels
203523 for 3 reels
203524 for 4 reels
203525 for 5 reels
203526 for 6 reels
1654
2b: Mounting Channels for
Open Reels
For mounting open hose reels to ceiling. Includes
mounting channel, base plate, hold down plate, cap
screws (3/8–16 UNC –2a X 0.625 in), lockwashers,
and weldnuts on channel.
241791 for 1 reel
241792 for 2 reels
241793 for 3 reels
241794 for 4 reels
241795 for 5 reels
241796 for 6 reels
To Next Page
Loading...
