111
Harness Covers
Make sure that harness covers do not interfere
with placement of the chest clip at armpit level.
To remove, undo the fastening strips and remove.
Infant Body Support
Use only in the rear-facing mode. Body support
must be used if shoulders are below the lowest
harness setting.
Never allow body support to bunch or fold behind
child.
Infant Head Support
Use only in the rear-facing mode. To adjust the
support, pull up until desired height.
To install, thread the head support straps through
the headrest and use the fastening strips to
connect the straps together.
To remove, undo the fastening strips and pull the
straps out of the headrest.
8 Accessories (on select models)
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 111NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 111 8/28/20 3:50 PM8/28/20 3:50 PM
To Next Page
Loading...
