Graco 4EVER DLX EXTEND2FIT - Anti-Rebound Bar; Attaching the Anti-Rebound Bar

Anti-Rebond Bar
9
112
8 Anti-Rebound Bar
Attaching the Anti-Rebound Bar
(Rear-Facing Only)
• The Anti-Rebound Bar can ONLY be used in rear-
facing mode. DO NOT use the Anti-Rebound Bar in
forward-facing or booster mode.
Insert the ends of the Anti-Rebound Bar into the
holes on the front of the car seat until the bar
CLICKS into place.
Install with the Anti-Rebound Bar rising upwards.
DO NOT install with the Anti-Rebound Bar dipping
downwards.
•Do not carry the car seat by holding onto the Anti-
Rebound Bar.
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 112NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 112 8/28/20 3:50 PM8/28/20 3:50 PM