47
Rear Facing
with Seat Belt
3-C
8. Route the Vehicle Seat Belt
Thread vehicle seat belt through the rear-facing
belt path (marked with a blue label) and out the
other side. Buckle it. The seat belt should lie as flat
as possible and not be twisted.
Note: It may be easier to route the vehicle seat
belt by lifting seat pad up to expose the belt path.
Make sure the vehicle seat belt is in front of the
buckle strap when the buckle is in the inner-most
position, and in behind when in the outer-most
position.
9. Lock Vehicle Seat Belt
In most vehicles today, slowly pull the shoulder
belt all the way out and then let it go back in. You
will hear a clicking sound. Slowly pull out on the
belt and it should be locked. If not, review your
car’s owner manual and section 10-D.
Review your vehicle’s owner manual for vehicle seat belt use
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 47NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 47 8/28/20 3:50 PM8/28/20 3:50 PM
To Next Page
Loading...
