48
Rear Facing
with Seat Belt
3-C
10. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car seat.
Pull on the shoulder belt to tighten while feeding
the slack back in the retractor.
11. Test For Tightness
Grab the sides of the seat where the vehicle seat
belt is and slide the car seat side-to-side and
front-to-back.
If the seat moves less than 1” (2.5 cm), it is tight
enough.
12. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat. The
bubble must be completely within the blue
zone. Readjust if needed.
See section 5-A to secure your child.
Recheck the level indicator with child in seat.
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 48NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 48 8/28/20 3:50 PM8/28/20 3:50 PM
To Next Page
Loading...
